WIDE BELT SANDER HEAVY DUTY MODELS
INSUFFICIENT PRESSURE PROTECTION
In case insufficient working air pressure occurs, the machine brakes automatically for safety guard.
CONVEYOR BELT TRACKING CONTROL
The conveyor belt tracking is pneumatically controlled to effectively prevent out-of-track.
The main frame is fabricated of heavy duty-steel plate and ribbed to minimize vibration and deflection.
All operating controllers are centralized in a convenient control panel. Large, clearly identified and color coded push buttons simplify set up and start-up.
Maintains constant check during operation to indicate percentage of full load on motor. Conveniently mounted for immediate readout.
Emergency Stop Button
Large mushroom push button on control panel provides immediate stop control of all operating systems.
Main Motor Drive
Heavy-duty rugged support of sanding head drive motor. Horsepower of motor directly related to size and performance requirements of specific unit ordered.
Heavy-Duty Rubber Covered Contact Drum
Carefully designed and balanced to insure precise, chatter-free sanding. Covered with proper durometer rubber for each application.
Spring Loaded Hold-Down Rolls.
Spring loaded hold-down rolls
Spring loaded pinch rolls are mounted at the infeed and outfeed of the machine to insure positive feeding.
The hold-down plate is hard chrome treated for maximum wear resistance.
Variable Feed Speed
Sanders have variable feed speed as standard equipment.
|Main motor standard||15HP||15HP||15,10HP||20,20,15HP|
|Table hoist motor||1/2HP||1/2HP||1/2HP||1/2HP|
|Feed speeds (Variable)||6-26 M/min||6-26 M/min||6-26 M/min||6-26 M/min|
|Sanding belt size||25" x 75"||25" x 75"||25" x 75"||25" x 75"|
|Compressed air required||5 kg/cm²||5 kg/cm²||6 kg/cm²||6 kg/cm²|
|Exhaust volume requirement||1030 M³/Hr||1030 M³/Hr||2064 M³/Hr||3500 M³/Hr|
|Dimensions: (LxWxH)||62" x 56" x 81"||62" x 56" x 81"||79" x 70" x 81"||100" x 70" x 80"|
|Packing size: (LxWxH)||65" x 59" x 85"||65" x 59" x 85"||82" x 73" x 84"||103" x 73" x 86"|